EvverLap is supplied in planks, however, we also offer large format boards on a project-by-project basis (Minimum Order Quantity applies) – these large format boards give the flexibility to produce custom-sized planks on-site (or off-site) to meet architects' design intent.

For more in-depth and technical information, refer to our downloads section here.

Colour matching options are available where we can match the current façade colours or if you supply a recognised colour reference, i.e. RAL.

Valcan Evverlap comes in a total of 19 standard colours across two ranges; the Solid colours and the Stained colour range.

SOLID COLOURS
There are 11 standard solid colours to suit façade requirement and design intent - custom colours are also available on request

STAINED COLOURS
The stained range of colours consists of 10 finishes to suit a wide range façade requirement and design intent.   An excellent replacement to common timber cladding such as Larch and Cedar.

EvverLap is light weight and easy to install using specific Vitrafix screws or rivets to either a Vitrafix VF1 or VF2 framing systems (depending on wall build-up) to give a non-combustible solution. Where required, fixings can be colour matched to the panel/plank.

For an overlapping weatherboard type and large format flat sheet installations, fixings are installed at maximum 600 mm centres aligning with the carrier frame behind. For more information, see the downloads section below.

The panels can be easily drilled and cut using standard site tools such as plunge saws, jig saws and mitre saws with fibre cement blades. Panels can be installed to provide a horizontal or vertical lap design as required.